Cisco Catalyst 9164 Series User Manual

Cisco Orderable Accessories
You can order the following accessories separately, from Cisco:
• AP-mounting brackets to mount the AP
DescriptionMounting Brackets
For low-profile installationsAIR-AP-BRACKET-1=
For electrical or network boxes above ceiling
mounts
AIR-AP-BRACKET-2=
Flush ceiling grid clipAIR-AP-T-RAIL-F=
Recessed ceiling grid clipAIR-AP-T-RAIL-R=
T-RAIL channel adapterAIR-CHNL-ADAPTER=
• Power injectors when Power over Ethernet (PoE) is not available
DescriptionPower Supply
Mid-span power injector AIR-PWRINJ7= when
(PoE) is not available
Power specifications: 50W, 56VDC
For more information, see the power injector data
sheet.
AIR-PWRINJ7=
A 802.3at power injector when PoE is not available
Power Specifications: 30W, 55VDC
For more information, see the power injector data
sheet.
AIR-PWRINJ6=
Meraki 802.3bt PoE injector
Power Specifications: 60W, 55VDC
For more information, see the power injector data
sheet.
MA-INJ-6-x
DC power adapter
Power Specifications: 50W, 54VDC
MA-PWR-50WAC
Cisco Catalyst 9164 Series Wi-Fi 6E Access Point Hardware Installation Guide
14
Unpacking Your Access Point
Cisco Orderable Accessories

Cisco Catalyst 9164 Series Specifications

General

Brand	Cisco
Model	Catalyst 9164 Series
Category	Wireless Access Point
Language	English