Cisco Catalyst 9166 Series User Manual

AP Model Numbers and Regulatory Domains
DetailsProduct IDAP Type
Wi-Fi 6E AP, tri-band, 802.11ax
with internal antennas
CW9166I-A
CW9166I-B
CW9166I-E
CW9166I-F
CW9166I-Q
CW9166I-R
CW9166I-Z
CW9166I-ROW
CW9166I-MR
Access Point for indoor
environments, with internal
antennas
Verify whether the AP model you have is approved for use in your country. To verify approval and to identify
the regulatory domain that corresponds to a particular country, see https://www.cisco.com/c/dam/assets/prod/
wireless/wireless-compliance-tool/index.html. Not all regulatory domains have been approved. As and when
they are approved, this compliance list is updated.
The x in the model numbers represents the regulatory domain.
Note
Antennas and Radios
The following sections provide detailed information about the AP's antennas and radios.
Internal Antennas
The Cisco Catalyst 9166I AP (CW9166I-x) has the following list of internal antennas:
• Four internal dual-band antennas with a dedicated 2.4-GHz radio and a 5-GHz radio
• Four internal dual-band antennas with a dedicated 6-GHz radio and a 5-GHz radio
• One internal single-band antenna with a dedicated 2.4-GHz IoT radio
• Two tri-band antennas with a dedicated 2.4 GHz, 5-GHz, and 6-GHz Aux radio
Cisco Catalyst 9166 Series Wi-Fi 6E Access Point Hardware Installation Guide
4
About the Access Point
AP Model Numbers and Regulatory Domains

Cisco Catalyst 9166 Series Specifications

General

Brand	Cisco
Model	Catalyst 9166 Series
Category	Wireless Access Point
Language	English