Cisco Catalyst 9166 Series User Manual

CHAPTER 2
Hardware Features
This chapter describes the hardware features of Cisco Catalyst 9166 Series Wi-Fi 6E Access Point and contains
the following sections:
• Access Point Views, Ports, and Connectors, on page 7
• CW9166I (Internal Antenna) Radiation Patterns, on page 9
Access Point Views, Ports, and Connectors
Cisco Catalyst 9166 Series Wi-Fi 6E Access Point has multiple options that you can use to power the AP.
For information about connectors and ports for the AP models, see Connectors and Ports on the AP, on page
7.
Environment Sensors
The AP has inbuilt environment sensors that work with Cisco DNA Spaces. There are two visible vents at
the top of the AP. The sensors measure the following environment parameters:
• Ambient air temperature sensor
• Air quality sensor (Total Volatile Organic Compounds [TVOC])
• Relative humidity sensor
For more information on how to configure the AP sensor in DNA Space, see the AP as a Sensor section
of the Cisco DNA Spaces: IoT Services Configuration Guide.
Note
Connectors and Ports on the AP
The following figures show the available ports on the AP:
Cisco Catalyst 9166 Series Wi-Fi 6E Access Point Hardware Installation Guide
7

Cisco Catalyst 9166 Series Specifications

General

Brand	Cisco
Model	Catalyst 9166 Series
Category	Wireless Access Point
Language	English