Cisco IE 2000 Release Notes

16
Release Notes for the Cisco IE 2000 Switches, Cisco IOS Release 15.2(1)EY
NEW DOC # PENDING
Open Caveats
Open Caveats
Note You can click the issue number to view more information in the Cisco Bug Search tool (login required).
Caveats Resolved in This Release
Note You can click the issue number to view more information in the Cisco Bug Search tool (login required).
Issue Description
CSCue28976 The show l2nat statistics command shows that total packets is less than the
translated packets after running the traffic for few days.
Work Around: There is no workaround.
CSCuh36550 When power inline wattage max value is configured at the global
configuration level. The switch will print the error messages during boot up if
value is not the default value (65 watts)
Work Around: There is no operational impact and there is no workaround
CSCtx35101 The password must be entered twice before it is accepted in Express Setup.
Work Around: There is no workaround.
CSCum76147 No warning for Port Security Settings changes displayed via Device Mgr.
Work Around: There is no workaround.
CSCum67722 Maximum mac address range should vary according to the SDM template
settings on the Eiskaffee. Maximum unicast mac address range is not similar to
CLI. In Eiskaffee for all the SDM template its shows as 8192 as maximum mac
range, which is incorrect.
Work Around: There is no workaround.
CSCum76505 Eiskaffee-S4P3-channel number beyond the limit not working as expected
Work Around: There is no workaround.
Issue Descripton
CSCui48101 When the power mode on a PoE interface is set to static, the port may go to
err-disable if sufficient power is not available.
Work Around: Use the default auto mode by entering the power inline auto
command.

Cisco IE 2000 Specifications

General

Brand	Cisco
Model	IE 2000
Category	Switch
Language	English