8
Getting Started and Product Document of Compliance for the Cisco IR1101 Industrial Integrated Services Router
Installing a Pluggable Module
For hazardous location environments, follow these warnings when installing a pluggable module.
Warning: Explosion Hazard - The area must be known to be nonhazardous before installing, servicing, or replacing
the unit. Statement 1082
1. Remove the blank plate by unscrewing the latch lock screw(1) that holds the plate secure. See Figure 2.
Figure 2 Latch Lock Screw
2. Slide the blank plate out of the device.
3. Prepare the cellular modem module by inserting the micro SIMs applicable for your modems into the device. Remove
the screw (1) holding the access plate in place that covers the SIM slots. It is located on the side of the module, as
shown in Figure 3
Figure 3 Sim Access Plate
4. Install your SIMs as shown in Figure 4. Make note of the proper slot number and SIM orientation.