DTEAbbreviationDescriptionPin Number
—>DTRDTE Ready3
COMSignal Ground4
<—RxDReceived Data5
—>TxDTransmitted Data6
<—CTSClear To Send7
—>RTSRequest To Send8
Ethernet and Optical SFP Modules
The IR1101 Ethernet and Optical SFP modules provide connections to other devices. These field-replaceable
transceiver modules provide the uplink interfaces. The Ethernet and Optical modules can be either copper or
optical. Details are in the two tables listed below.
The Local connectors (LCs) provide the fiber-optic connection. RJ-45 connectors allow copper connections.
You can use any combination of the supported SFP modules listed in the table that follows.
The IR1101 is designed to operate in the Industrial temperature range (-40C to +85C internal component
temperature range) and therefore cannot support commercial rated SFPs.
Note
Table 12: Supported Gigabit SFPs
DOMIndustrial
-40C to
+85C
Extended
-5C to
+85C
Commercial
0C to +70C
FiberDistanceGE SFP
YESMMF220-550 mGLC-SX-MM-RGD
YESMMF/SMF550m/10 kmGLC-LX-SM-RGD
YESYESSMF70 kmGLC-ZX-SM-RGD
YESYESMMF220-550 mSFP-GE-S
YESYESMMF/SMF550 m/10 kmSFP-GE-L
YESYESSMF70 kmSFP-GE-Z
Product Overview
19
Product Overview
Ethernet and Optical SFP Modules