Cisco ISR User Manual

2-9
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
Chapter 2 Configuring Radio Settings
Configuring Universal Client Mode
no service password-encryption
!
hostname C1803W_UC
!
boot-start-marker
boot-end-marker
!
logging buffered 4096 debugging
no logging console
!
no aaa new-model
!
resource policy
!
!
dot11 ssid hurricane
authentication open
authentication key-management wpa
wpa-psk ascii 0 allyouneedislove
!
dot11 ssid tsunami
authentication open
guest-mode
!
dot11 priority-map avvid
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 100.1.1.1
!
ip dhcp pool jimmy
network 100.1.1.0 255.255.255.0
default-router 100.1.1.1
!
!
!
!
!
!
controller DSL 0
line-term cpe
!
!
bridge irb
!
interface Dot11Radio0
ip address 100.1.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
!
ssid tsunami
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
rts threshold 2312
no cdp enable
!
interface Dot11Radio1
ip address dhcp
ip nat outside
ip virtual-reassembly

Cisco ISR Specifications

General

Brand	Cisco
Model	ISR
Category	Wireless Access Point
Language	English