Cisco Network Router User Manual

Contents
iv
Cisco PNNI Network Planning Guide for MGX and SES Products, Release 5
Part Number OL-3847-01 Rev. D0, April, 2004
CHAPTER 2 Interoperability and Performance Planning 2-1
Compatible Standards 2-1
Specifications 2-1
Connection Limit Adjustments 2-4
Physical Network Planning 2-5
Install Redundant Hardware in Switches 2-5
Parallel Links Between Adjacent Switches 2-5
Multiple Links Between Adjacent Peer Groups 2-6
Multiple Links to an External Network 2-6
Multiple Paths Between Network Nodes 2-6
Planning Guidelines for Individual Peer Groups 2-6
Planning Guidelines for Hierarchical Networks 2-7
Planning Guidelines for Peer Group Leaders 2-7
Planning Guidelines for Border Nodes 2-7
CHAPTER 3 Address and Closed User Group Planning 3-1
Address Planning Overview 3-1
Planning Address Configuration Settings 3-3
Selecting an ATM Address Format 3-3
Supported Address Formats 3-4
Guidelines for Selecting an Address Format 3-5
Address Registration Authorities 3-6
Selecting a PNNI Level 3-6
Selecting the PNNI Peer Group ID 3-10
Selecting the ATM Address 3-11
Selecting the ILMI Address Prefix 3-12
Selecting the SPVC Address Prefix 3-12
Planning Address Prefixes for AINI and IISP Links 3-12
Selecting Static Addresses for UNI Ports 3-13
Additional Guidelines for Creating an Address Plan 3-13
Closed User Group Overview 3-14

Cisco Network Router Specifications

General

Brand	Cisco
Model	Network Router
Category	Network Router
Language	English