Cisco Network Router User Manual

CHAPTER
2-1
Cisco PNNI Network Planning Guide for MGX and SES Products, Release 5
Part Number OL-3847-01 Rev. D0, April, 2004
2
Interoperability and Performance Planning
This chapter describes the standards supported by the Cisco switches covered in this guide and provides
performance specifications for these switches.
Compatible Standards
The Cisco switches described in this guide are designed to interoperate with switches that support the
following standards:
• Private Network-to-Network Interface (PNNI) Version 1
• User-Network Interface (UNI) 3.0
• UNI 3.1
• UNI 4.0
• Integrated Local Management Interface (ILMI) 4.0
• ATM Inter-Network Interface (AINI) 1.0
• Interim Inter-Switch Protocol (IISP) 3.0 and 3.1
• Traffic Management (TM) 4.0
Specifications
Table 2-1 lists PNNI network specifications for MGX switches and the MGX 8880 Media
Gateway.Table 2-2 lists PNNI network specifications for SES equipped BPX switches.
Note The specifications listed in Table 2-1 and Table 2-2 are recommended or maximum limits that may be
constrained by the memory requirements for other features. For example, the switches listed cannot
simultaneously support the maximum number of connections, links, and logical interfaces.

Cisco Network Router Specifications

General

Brand	Cisco
Model	Network Router
Category	Network Router
Language	English