www.cisco.com
You may deactivate the microphone for privacy
reasons, if needed (
).
Tap as outlined (
) to adjust the sound volume.
To set ringtones and sound, tap More (
) followed by
Settings (
). Then tap Ringtone & Sound Settings (
).
Set Keytones to On or O, the Ringtone volume and
select the ringtone of your choice. Tap Exit to go back.
When set to Do Not Disturb, ringtones are muted and
call attempts made by others to reach you will appear
as missed calls.
You may, however, place calls as much as you like. To
activate Do Not Disturb, press the Available icon as
outlined. Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide. This will not deactivate the Do Not Disturb, as such.
Sound matters
Ring tones and sounds
Do not disturb
When someone calls you, the below display will
appear. Tap ACCEPT to take the call or DECLINE to
reject it.
Receiving calls
10
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
To Next Page
Loading...
Need help?
General
