Contents
v
Cisco 3600 Series Routers Hardware Installation Guide
OL-2056-05
Rack-Mounting the Chassis 3-3
Attaching Brackets to the Router 3-5
Mounting the Router in the Rack 3-14
Wall-Mounting the Cisco 3620 Router 3-18
Attaching Rubber Feet to the Router 3-18
Attaching Wall-Mount Brackets to the Router 3-18
Mounting the Router on the Wall 3-18
Installing Chassis Ground Connection 3-19
Cisco 3620 and Cisco 3640 Chassis Ground Connection 3-19
Cisco 3631 Chassis Ground Connection 3-24
Cisco 3660 Chassis Ground Connection 3-25
Power Connections 3-27
Connecting Routers to AC Power 3-27
Connecting Routers to a DC-Input Power Supply 3-27
Wiring the DC-Input Power Supply in Cisco 3620 and Cisco 3640 Routers 3-28
Wiring the DC-Input Power Supply in Cisco 3631 Routers 3-30
Wiring the DC-Input Power Supply in Cisco 3660 Routers 3-32
Connecting Routers to the Cisco Redundant Power System 3-36
Connecting WAN, LAN, and Voice Cables 3-37
Ports and Cabling 3-37
Connections for Cisco 3620, Cisco 3640, and Cisco 3631 Routers 3-39
Connections for Cisco 3660 Routers 3-39
Connecting WAN, LAN, and Voice Cables (Without Chassis Shield) 3-39
Connecting WAN, LAN, and Voice Cables (With Chassis Shield—Telco Only) 3-40
Connecting to a Console Terminal or Modem 3-43
Connecting to the Console Port 3-44
Connecting to the Auxiliary Port 3-46
Identifying a Rollover Cable 3-50
Powering Up the Router 3-51
Checklist for Power Up 3-51
Front Panel Indicators 3-51
Power-Up Procedure 3-52
Configuring the Router 3-53
Initial Configuration Using SDM 3-53
Initial Configuration Using the Setup Command Facility 3-54
Initial Configuration Using the CLI (Manual Configuration) 3-57
To Next Page
Loading...
Need help?
General
