Cisco SF100D-16P Hardware Installation Guide

4-12
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03
Chapter 4 Installing the Internet Streamer CDS Software and Initially Configuring a CDE
Running the BIOS Setup Utility
Step 11 Use the arrow keys to return to the Advanced menu. Choose Console Redirection and press Enter. The
Console Redirection screen appears (see
Figure 4-16).
Figure 4-16 Console Redirection Screen
a. Set the Com Port Address option to On-board COM A.
b. Set the Baud Rate option to 9600.
c. Set the Continue C.R. after POST: option to On.
Step 12 When you are finished, navigate to the Exit submenu and choose Exit Saving Changes. Press Yes when
prompted (see
Figure 4-17).
Figure 4-17 Exit Saving Changes Screen
Step 13 Ensure that the CD with the CDS software image is in the USB CD-ROM drive and press Enter to
confirm and reboot the system. Your configuration is saved, you exit the BIOS Setup menu, and the
system reboots.
a. Sometimes the USB CD-ROM drive is not detected by the BIOS after the first power-on. In this case,
the CD-ROM drive is not present in the above Hard Drive element list. Press the Reset button (not
the Power button) and try again. If it still fails, try a different USB CD-ROM drive.

Cisco SF100D-16P Specifications

General

Brand	Cisco
Model	SF100D-16P
Category	Switch
Language	English