2 Cisco 220 Series Smart Plus Switches Quick Start Guide
Welcome
Thank you for choosing the Cisco 220 Series Smart Plus Switch, a Cisco
network communications device. This device is designed to be
operational right out-of-the-box as a standard bridge. In the default
configuration, it will forward packets between connecting devices after
power up.
This guide familiarizes you with the layout of the switch and describes how
to deploy the switch in your network. For additional information, see
www.cisco.com/go/220switches.
Before You Begin
Before you begin the installation, make sure that you have the following:
• RJ-45 Ethernet cables (Category 5E or higher) for connecting network
devices.
• Console cable for using the console port to manage your switch.
• Tools for installing the hardware. The rack-mount kit packed with the
switch contains four rubber feet for desktop placement, and two
brackets and twelve screws for rack-mounting.
• PC with Internet Explorer (version 8.0 and higher), Firefox (version 20.0
or higher), Chrome (version 23.0 or higher), or Safari (version 5.7 or
higher) for using the web-based interface or the console port to
manage your switch.
Cisco 220 Switch Features
This section describes the available product models and the exterior of the
switch to help familiarize you with your switch.
Product Models
Model Description Ports
SF220-24 24-Port 10/100 Smart Plus
Switch
24 FE Copper + 2 GE
Combo
SF220-24P 24-Port 10/100 PoE Smart Plus
Switch
24 FE Copper + 2 GE
Combo
SF220-48 48-Port 10/100 Smart Plus
Switch
48 FE Copper + 2 GE
Combo
To Next Page
Loading...
Need help?
General
