Cisco SF352-08P Administration Guide

Administration: Stack Management
Stack Management
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 134
8
• Stack Master—Displays the unit ID of the master unit of the stack.
Stack Topology View
This view provides a graphical view of the device. Hovering over it displays the unit number,
its function in the stack (master, backup or slave) and the devices that it is connected to in the
stack and through which stacking ports. An example is shown below:
Unit View and Stack Port Configuration
When you click on a specific device in the Stack Topology View, a graphical view of the
device is seen. An example is shown below.:
STEP 2 To select stack ports for a device:
a. Click a device in the Stack Topology View. The ports on this device are displayed in the
Unit View and Stack Port Configuration.
b. When you hover over a port, a tool tip displays the stacking port number, unit that it is
connected to (if there is one), the port speed and its connection status. See an example of
Network Ports
OOB Port
Stack Port

Cisco SF352-08P Specifications

General

Brand	Cisco
Model	SF352-08P
Category	Switch
Language	English