VLAN Management
Voice VLAN
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 255
12
STEP 3 Configure Telephony OUI VLAN membership for ports in the Telephone OUI Interface page.
Voice VLAN Configuration
This section describes how to configure voice VLAN. It covers the following topics:
• Voice VLAN Properties
• Auto Voice VLAN Settings
• Telephony OUI
Voice VLAN Properties
Use the Voice VLAN Properties page for the following:
• View how voice VLAN is currently configured.
• Configure the VLAN ID of the Voice VLAN.
• Configure voice VLAN QoS settings.
• Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
• Configure how Auto Voice VLAN is triggered.
To view and configure Voice VLAN properties:
STEP 1 Click VLAN Management > Voice VLAN > Properties.
• The voice VLAN settings configured on the device are displayed in the Voice VLAN
Settings (Administrative Status) block.
• The voice VLAN settings that are actually being applied to the voice VLAN
deployment are displayed in the Voice VLAN Settings (Operational Status) block.
STEP 2 Enter values for the following Administrative Status fields:
• Voice VLAN ID—Enter the VLAN that is to be the Voice VLAN.
NOTE Changes in the voice VLAN ID, CoS/802.1p, and/or DSCP cause the device to
advertise the administrative voice VLAN as a static voice VLAN. If the option Auto
Voice VLAN Activation triggered by external Voice VLAN is selected, then the default
values need to be maintained.
To Next Page
Loading...
Need help?
General
