53
Placing a Three-Way Conference Call
To initiate a conference call:
STEP 1 Press the conf softkey during an active call. The first call is placed on hold, a second
line is opened, and you hear a dial tone.
STEP 2 Dial the second person’s telephone number.
STEP 3 Press the
conf
softkey again. All three parties are connected in the conference
call.
When you hang up, the other two parties are disconnected.
Conferencing a Held Call with an Active Call
If you have a call on hold and an active call, you can create a conference call between the active
call, the call on hold, and you.
With an active call and one or more calls on hold, press the
conf
softkey.
•
If you have only one call on hold, the conference call is created between the three of you.
•
If you have more than one call on hold, choose the held call you want to conference in by
pressing the line button of the call on hold.
Using the Phone Directories
Your IP phones provide several different types of phone directories, depending on the phone
model and what the system administrator has set up for the company.
In general, the phones provide the following types of directories:
•
Personal Directory—The personal directory provides a place for you to store and view
frequently dialed numbers. You can also dial numbers from the directory.
To Next Page
Need help?
General
