Cisco SPA 303g User Manual

33
Using Basic Phone Functions
This chapter provides instructions on using your phone’s basic functions.
Using Phone Hardware and Accessories (Cisco SPA 303)
Using the Speakerphone
To use the speakerphone, press the Speaker button (the handset can be either on or off hook).
Using the Headset with Your IP Phone
Install the headset as described in the “(Optional) Connecting Wired and Wireless Headsets”
section
NOTE Steps to use your headset with the IP phone may vary. Consult the user documentation
for your headset for more information.
Press the Headset button on your phone and dial the number to place a call, or press the
headset button to answer a ringing call.
Switching Between the Handset/Headset/Speakerphone During a
Call
Any of these audio devices can be used during a call. Only one device at a time can be used.
The handset can be on the hook when using the speakerphone or headset function. If
switching from the handset to the speakerphone, make sure the speakerphone or headset
light is illuminated before placing the handset back on the hook. (If you are switching from the
handset to a wireless headset, however, do not replace the handset or you will disconnect the
call.)

Cisco SPA 303g Specifications

General

Brand	Cisco
Model	SPA 303g
Category	IP Phone
Language	English