20
IX5000 Field-Replaceable Units and Country- and Region-Specific Power Connectors
Replacing a Display—Part Number CTS-5K-70-G1=
Step 3 Remove the camera lens hood (camera cover) by pulling it away from the endpoint structure. The cover
attaches to the structure with magnets.
Step 4 While still wearing gloves, remove the upper fascia by grasping the left side of the fascia and pulling it
out. Continue holding the left side while moving towards the center of the system. Gently fold and join
the left side onto the center, making sure not to bend or crease the fascia (it should hold a U shape where
it folds over - not a V shape). Move to the right of the system and continue to pull the fascia outward.
Fold it over once more and join the center section with the right section. Continue removing the fascia
until the entire fascia is removed from the system. Set the fascia on the ground and leave it in three
U-shaped sections.
To Next Page
Loading...
Need help?
General
