www.cisco.com
15
Cisco TelePresence System Prole-series, C-series codecs, Quick Set C20 User guide
D14852.03 User guide Cisco TelePresence Prole, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
The call settings optionsMain source settings
Main source
You may choose what to use as the main input source. This will typically be the
camera, a secondary camera (if applicable), the PC input or other sources such as a
DVD player.
Do as follows:
1. In the menu select Settings > Main source and expand the submenu.
2. Use the Arrow keys to move between the alternatives and use
to select the
alternative you want to use.
3. Collapse the menu using the
Arrow key.
Call settings—an overview
Use the Call settings menu to set the default bit rate and how the system shall answer
incoming calls. Answering can be set to automatic or to manual. More on this can be
found on the next page.
Do as follows:
1. In the menu select Settings > Call settings and expand the submenu.
2. Use the Arrow keys to move between the alternatives and use
to select the
alternative you want to use.
3. Collapse the menu using the
Arrow key.
This example has been
taken from a Codec C20
equipped Prole. Larger
systems may have more
options.
More on Prole systems
and their codecs can be
found on
page 30.
Layout
Main source: Camera
Call settings
Language: English
Date and time
Sounds and alerts
Wallpaper: Growing
System information
Administrator settings
Restart
SETTINGS
Layout
Main source: Camera
Call settings
Language: English
Date and time
Sounds and alerts
Wallpaper: Growing
System information
Administrator settings
Restart
SETTINGS
Call
Meetings
Presentation
Camera control
Settings
HOME
Call
Meetings
Presentation
Camera control
Settings
HOME
Camera
PC
CALL SETTINGS
Auto answer mode: On
Auto answer delay: 5 sec
Auto answer mute: Off
Do not disturb mode: Off
Default callrate: 4000 kbps
To Next Page
Loading...
Need help?
General
