Claas ARION 540 User Manual

Arion 500-600 10.07 – GB
A.6
PRECAUTIONS BEFORE STARTING
Caution is the best guarantee against any risk of accident
The driver must be fully familiar with the tractor and must
understand all the controls, their position and their purpose.
This manual must be read carefully.
If the tractor is used by anybody other than the owner, he must
be given all explanations required to allow him to work safely.
The driving position must be clean (instrument panel, steering
wheel, floor and pedals).
Footsteps must be clean (no mud) to avoid slipping when
climbing or descending.
Use the steps and handles provided when getting into or out of
the tractor. Before starting the engine, make sure that all
controls are in the neutral position, particularly the power
take-off lever.
Only run the engine in well ventilated areas.
Make sure there is nobody nearby before starting the tractor.
Fully release the handbrake before starting.
Do not start work if the tractor is not working properly.
001hsn25
001hsn26

Claas ARION 540 Specifications

General

Max Speed	40 km/h
Hydraulic System	Open Center
Max. lift capacity	6200 kg
Lift Capacity	6200 kg
Engine Power	134 hp
Transmission	Hexashift
Rated Power	107 kW
Max. Power	145 HP
Number of gears	24 forward / 24 reverse
Hydraulic pump flow	110 L/min
Weight	5200 kg
Engine Type	4-cylinder
Hydraulic Pump Capacity	110 L/min
Engine	4-cylinder, Turbocharged