APX280M Power System Amplifier
6
2-Channel Full-Range, Satellite, or Subwoofer Stereo System
(Set INPUT SELECT Switch to STEREO)
Figure 5
In this application, the amplifier is used in stereo and drives two full-range (or
satellite or subwoofer) speakers. NOTE: A passive crossover must be used
with satellite speakers.
Set X-Over Mode as
shown.
Set X-Over Mode as shown;
adjust FREQ to speaker
specifications.
Set X-Over Mode as shown;
adjust FREQ to speaker
specifications.
To Next Page
Loading...
Need help?
General
