Clarion CX201 User Manual

Basic Operations
English
10 CX201
3-1. Each time you turn the [ROTARY] knob,
the tone effect changes in the following
order:
“CUSTOM” ↔ “EXCITE” ↔ “IMPACT” ↔
“B-BOOST” ↔ “OFF”
CUSTOM : user custom
EXCITE : bass and treble emphasized
mid emphasized
IMPACT : bass and treble emphasized
B-BOOST : bass emphasized
OFF : no sound effect
When “CUSTOM” is set:
3-1. Press the [ROTARY] knob.
3-2. Press the [x] or [v] button to select the
“BASS”, “MID” or “TREBLE” mode to
adjust.
3-3. If you want to set the flat, press the
[ROTARY] knob to return to the “CUSTOM”
mode, then press and hold the [ROTARY]
knob (1 sec.), bass/mid/treble
charac
teristics become flat and switch to
the “CUSTOM” mode.
When “EXCITE/IMPACT/B-BOOST” is set:
3-1. Press the [ROTARY] knob.
3-2. Turn the [ROTARY] knob to adjust the
setting in the range of -3 to +3.
∗ The factory default setting is “0”.
3-3. Press the [ROTARY] knob to return to the
previous mode.
● Adjusting the BASS/MID/TREBLE
This adjustment can be performed only when
the BEAT EQ is set to “CUSTOM”.
Note:
• While connected with the external amplifiers,
please do not set the “BASS/MID/TREBLE” in
the maximum level. Otherwise the speakers may
be damaged.
3-1. Press the [ROTARY] knob.
3-2. Turn the [ROTARY] knob to select as
following order:
“BASS<G>” ↔ “BASS<F>” ↔
“BASS<Q>” ↔ “MID<G>” ↔ “MID<F>” ↔
“MID<Q>” ↔ “TREBLE<G>” ↔
“TREBLE<F>” ↔ “TREBLE<Q>”
∗ The factory default setting is “BASS<G>”.
3-3. Turn the [ROTARY] knob to select the
setting.
BASS<G> :The factory default setting is “ 0 ”.
(Adjustment range: +7 to –7)
BASS<F>:
The factory default setting is “ 50 ”.
(Adjustment range: 50/100/200)
BASS<Q> :The factory default setting is “ 1 ”.
(Adjustment range: 0.7/1/1.4/2)
MID<G> : The factory default setting is “0”.
(Adjustment range: +7 to -7)
MID<F> :
The factory default setting is “ 500 ”.
(Adjustment range: 500/1K/2K)
MID<Q> :
The factory default setting is “1” .
(Adjustment range: 0.7/1/1.4/2)
TREBLE<G> : The factory default setting is “ 0 ” .
(Adjustment range: +7 to -7)
TREBLE<F>:
The factory default setting is
“
10K ”.
(Adjustment range: 5K/10K/15K)
TREBLE<Q> : The factory default setting is “ 1 ” .
(Adjustment range: 0.7/1/1.4/2)
3-4. Press the [ROTARY] knob to return to the
previous mode.
● Setting the MAGNA BASS EXTEND
The MAGN A BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
∗ The factory default setting is “OFF” (off).
2-1. Select “M-B EX”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● Adjusting the balance
2-1. Select “BALANCE”.
3-1. Turn the [ROTARY] knob to adjust the
balance of the right and left speakers.
∗ The factory default setting is “CENTER”
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
● Adjusting the fader
2-1. Select “FADER”.
3-1. Turn the [ROTARY] knob to adjust the
balance of the rear and front speakers.
∗ The factory default setting is “CENTER”
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
● Setting the subwoofer
You can set the low pass filter of subwoofer.
This adjustment can be performed only when
the “REAR/S-W” is set to “S-WOOFER”.
2-1. Select “LPF”.
CX201_EN.book Page 10 Wednesday, November 17, 2010 10:50 AM

Clarion CX201 Specifications

General

Brand	Clarion
Model	CX201
Category	Car Receiver
Language	English