Clarion DB345MP User Manual

DCP
connector
I
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP
is in the correct orienta-
tion.)
Note:
• If the OCP is dirty, wipe off the dirt with a soft, dry
cloth only.
• The DCP can easiIy be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• When the Release button is pressed and
the DCP is unlocked, the car's vibrations
may cause it to fall. To prevent damage to
the DCP, always store it in its case after de-
taching it. (See figure above.)
• The
connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by press-
ing
on it with fingernails, pens, screwdriv-
ers, etc.
~ [RELEASE] button
~<jJ~
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
;\< The OCP is unlocked
3. Remove the DCP.
Removing the DCP
1. Press the [FNC] button for 1 second or
longer to switch off the power.
2. Press in the [RELEASE] button.
The control panel can be detached to prevent
theft. When detaching the control panel, store
it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
DB345MP 7

Clarion DB345MP Specifications

General

Brand	Clarion
Model	DB345MP
Category	Car Receiver
Language	English