Note: Be sure to read this chapter referring to the front diagrams of
chapter "2. CONTROLS" on page
3.
Basic Operations
Be
sure
to
lower
the
volume
before
switch-
ing
off
the
unit
power
or
the
ignition
key. The
unit
remembers
its
last
volume
setting. If
you
switch
the
power
off
with
the
volume
up,
when
you
switch
the
power back on,
the
sud-
den loud
volume
may
hurt
your
hearing and
damage
the
unit.
Turning
on/off
the
power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1.
Press the [SRC] button.
2.
The illumination and display on the unit light
up.
The unit automatically remembers its last
Operation mode and will automatically switch
to display that mode.
3.
Press and hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Selecting a
mode
1.
Press the [SRC] button to change the Opera-
tion mode.
2.
Each time you press the [SRC] button, the Op-
eration mode changes
in
the following order:
Radio mode
~
CDIMP3IWMA mode
~
(USB mode)
~
AUX mode
~
Radio
mode...
Notes:
• If the CD mode is selected when no disc is inserted,
the display shows "NO DISC".
• If no USB drive is inserted, USB mode will not be
displayed.
Switching
the
display
Press the
[0]
button to select the desired display.
Each time you press the
[0]
button, the display
switches
in
the following order:
• Radio/CD Mode:
Main
display
~
Clock display
~
Main
display
• MP3IWMAlUSB Mode:
Main-1
display
(Track No., play time)
~
Main-
2 Display (Folder No., Track No.)
~
Title
Display
~
Clock
Display
~
Main-1 Display...
* Once selected, the preferred display becomes the
display default. When a function adjustment such
as volume is made, the screen will momentarily
switch to that function's display, then revert back
to the preferred display several seconds after the
adjustment.
Adjusting
the
volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise decreas-
es the volume.
* The volume level is from 0 (minimum) to 33 (maxi-
mum).
Audio
mode
adjustments
1.
Press the [A-M] button to select the Adjustment
mode. The mode switches as follows each time
the
[A-M] button is pressed:
BASS
~
TREB
~
BAL
~
FAD
~
Previous
mode
2.
Turning the [ROTARY] knob to adjust the
selected Audio mode.
BASS (Bass) :Adjustment range : -7 to +7
TREB (Treble): Adjustment range: -7 to +7
BAL (Balance): Adjustment range: L13 to R13
FAD
(Fader) :Adjustment
range:
F12 to R12
* The
display
returns
to the
previous
mode
7
seconds after the adjustment.
Note:
• Bass and Treble can only be adjusted when the
"Z-Enhancer" is off.
DB365USB
11
To Next Page
Loading...
Need help?
General
