CD/MP3IWMA Mode Operations
Loading a CD
Insert a
CD
into the center of the
CD
SLOT with
the labeled side facing
up.
"LOADING" appears
in
the display, the CD plays automatically after
loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be an-
other CD
in
the mechanism or the unit may require
service.
. .
rnm~@
• DIscs not beanng the DIGITALAUDID mark and CD-ROMs
cannot be played by this unit.
• Some CDs recorded
in
CD-R/CD-RW mode may
not be usable.
Loading 8 cm
compact
discs
* No adapter is required to play an 8 cm CD.
* Insert the 8 cm CD into the center of the insertion
slot.
For CD/MP3IWMA playback, please refer to "Op-
erations Common
to
CD
and USB Drive".
USB Mode Operation
What
is
USB?
USB is the abbreviation of Universal Serial Bus,
an
external bus standard that supports data
transfer rates of 12Mbps. The main unit is USB
2.0 compatible. (It is compliant with Universal Se-
rial Bus Revision
1.1
specification, which
is
Full
Speed supported but not running at High-Speed).
This means that the transfer rates only supports
until 12Mbps, which is the maximum speed of
USB1.1. USB also support hot plugging, which
is
the ability
to
add and remove devices to a main
unit while the unit is running and automatically
recognize the change.
Supported
audio
files
playback
Only MP3 and WMA files are currently support-
ed.
For further information
on
MP3IWMA play-
back, please refer to
"Operations Common
To
CD
and USB Drive".
Hot
plugging
function
When the unit
is
power
on,
this function allows
you
to start playing the tracks automatically when
the USB drive
is
inserted.
• Do
not
try
to
put
your
hand
or
fingers in
the
USB insertion port.
Also
never
insert
foreign objects
into
the
port.
• Do
not
insert USB devices
other
than
"USB
mass storage
class"
as
this
will
have
no
function
to
the
main
unit
or
deviceand may
have unexpected result.
• The main
unit
cannot be connected with
the
personal
computer
or
laptop.
• USB
drive
that
contains
WMA
files
with
DRM
protected
will
not
be read
by
the
main
unit.
• Reading
time
for
a USB
drive
may
differ
depends on
the
contents
of
the
data.
• USB driveinsertion may result in protruding
as
it
might
be dangerous
to
the
user
while
driving. For safety purposes,
it
is
advisable
to
use an USB extension cable
to
connect
between
the
USB
drive
and
the
USB
port
on
the
main unit.
16 DB365USB
To Next Page
Loading...
Need help?
General
