Clarion DB568RUSB User Manual

25
English
DB568RUSB
Operation Common to CD and USB
Drive
Folder repeat play
MP3/WMA :
This function allows you to play all tracks in the
MP3/WMA folder repeatedly.
1. Press and hold the
[
RPT
]
button for 1 second
or longer to perform folder repeat play.
The indications “
ALL...” and “RPT” light in the
display.
Random play
CD-DA :
This function allows you to play all tracks record-
ed on a disc in a random order.
MP3/WMA :
This function allows you to play all tracks of cur-
rent folder in a random order.
1. Press the
[
RDM
]
button to perform random
play.
The indication “
RDM” lights in the display.
Folder random play
MP3/WMA :
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc/
USB drive in a random order.
1. Press and hold the
[
RDM
]
button for 1 second
or longer to perform folder random play.
The indications “
ALL...” and “RDM” light in the
display.
To cancel play
1. Press the operating button previously se-
lected.
Operations Common to
Each Mode
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was changed
or the
[
T
]
button was pressed for 1 second or
longer.
Setting the method for title scroll
Set how to scroll in MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “A-SCROLL”.
3-1. Turn the
[
ROTARY
]
knob to select “ON” or
“OFF”.
To change display setting
1. Press the
[
A
]
button to switch to the adjustment
selection display.
2. Press the
[
,
]
button to select the “
item
name”.
“
SCRN SVR” “A-SCROLL”
“TEL-SW”
3. Turn the
[
ROTARY
]
knob to select the “desired
setting value”.
∗ After completing settings, press the
[
A
]
button
to return to the previous mode.
Turning the screen saver function
on or off
This unit is provided with the screen saver function
which allows you to show various kinds of patterns
and characters in the operation status indication
area of the display in a random order. You can turn
on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Turn the
[
ROTARY
]
knob to select the setting.
Each time you turn the
[
ROTARY
]
knob,
the setting changes in the following order:
SS OFF SS ON.

Clarion DB568RUSB Specifications

General

Brand	Clarion
Model	DB568RUSB
Category	Car Receiver
Language	English