EasyManuals Logo
Home>Clarion>Marine Equipment>GR10BT

Clarion GR10BT User Manual

Clarion GR10BT
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
English
Owner’s Manual
10
GENERAL
Problem Cause Remedy
Unit cannot power on. Unit fuse blown. Replace with new fuse of correct rating.
Vessel battery fuse blown. Replace with new fuse of correct rating.
No/low audio output. Incorrect audio output connection. Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume balance. Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of vessel.
Insulate all speaker wiring connections.
Poor sound quality or
distortion.
Speaker power rating does not
match unit.
Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Unit resets itself when
engine is off.
Incorrect connection between
ACC and Battery.
Check wiring and correct.
Auto seek function can
not nd any stations.
The antenna cable is not
connected.
Insert the antenna cable securely.
The signals are too weak. Select a station manually.
USB
Problem Cause Remedy
USB device cannot be
inserted.
The USB device has been
inserted incorrectly.
Reverse the connection direction of the USB
device and try again.
The USB connector is broken. Replace with a new USB device.
USB device is not
recognized.
The USB device is damaged. Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
it with a different USB device.
Connectors are loose.
No sound heard with
the display “No File”
shown.
No MP3/WMA le is stored in the
USB device.
Store these les properly in the USB device.
Sound skips or is
noisy.
MP3/WMA les are not encoded
properly.
Use properly encoded MP3/WMA les.
Bluetooth
Problem Cause Remedy
Cannot pair the
Bluetooth enabled
device with the audio
system.
The device does not support the
proles required for the system.
Reverse the connection direction of the USB
device and try again.
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the device for how
to enable the function.
Audio quality is poor
after connection with
a Bluetooth enabled
device.
The Bluetooth reception is poor. Move the device closer to the audio system or
remove any obstacle between the device and
the system.
7. TROUBLESHOOTING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion GR10BT and is the answer not in the manual?

Clarion GR10BT Specifications

General IconGeneral
BrandClarion
ModelGR10BT
CategoryMarine Equipment
LanguageEnglish

Related product manuals