Playing
back
files
in
the USB
memory
USB Operations
The operations
in
the USB Memory mode are
same as those
in
the MP3IWMAJAAC modes.
See "Listening to a CD" for details.
Note:
When performing the fast forward
or
fast
backward function, the playback speed will
become 10-time faster. For the VBR files, it
may differ depending on the file.
Connect your USB memory
to
the USB
connector. The system will automatically
detect the connected device, and change to
the USB mode (USB Memory mode), and
start playback after a while. If you reconnect
the same device that you disconnected last,
the system will play back where it left off.
• When an USB
memory
is
already
connected
Touch the [USB] key to select the USB
in
a
Main Menu mode.
The system changes to the USB mode (Mediai-
USB mode), and starts playback from the
previous position.
• Notes
on
the
Tag
titles
The limitations
on
the
Tag
titles are same as
those
in
the MP3IWMAlAAC modes.
• Folder representation
in
the
folder
list
The limitations
on
the folder representation
are same as those
in
the MP3IWMAlAAC
modes.
Selecting
the USB
Memory
mode
This system can play audio files (MP3IWMAlAAC) stored
in
an
USB memory which is recognized as
"USB Mass Storage Class device".
You
can use your USB memory as an audio device by simply
copying desired audio files into it.
Note:
• This system will
not
operate
or
may operate improperly with some USB
memory
• Files protected with
any
DRM
can
not
be played.
Notes
on
using
USB
memories
• General
notes
·When no data is present, the message "NO
FILE" will be displayed.
•The USB memory is used with the equalizer
function turned
OFF.
• Notes
on
the
MP3IWMAlAAC
files
·This system can play the MP3IWMAlAAC
files stored
in
the USB memory.
•This system cannot play DivX files stored
in
the USB memory.
·For
AAC files, this system supports only the
MPEG4 Audio files encoded by the iTunes.
·Set
the Sampling Frequency
to:
For MP3 files:
• MPEG1 Layer3: 32,44.1, or 48 kHz
• MPEG2 Layer3: 16, 22.05, or 24 kHz
• MPEG2.5 Layer3:
8,
11.025, or 12 kHz
For WMA files: 32, 44.1, or 48 kHz
For AAC files:
44.1
or 48 kHz
·Set
the Bit Rate to:
For MP3 files:
• MPEG1 Layer3: 32 to 320 kbps (VBR)
• MPEG2 Layer3: 16 to 160 kbps (VBR)
• MPEG2.5 Layer3: 16 to 160 kbps (VBR)
For WMA files: 32,48, 64, 80, 96, 128, 160,
or 192 kbps
For AAC files: 16 to 320 kbps (VBR)
·Add
the following file extension using single
byte characters:
For MP3 files: ".MP3" or ".mp3"
For WMA files: ".WMA" or ".wma"
For AAC files: ".M4A" or ".m4a"
• Notes
on
the
folder
structure
•The folder hierarchy must be within 8
hierarchical levels. Otherwise, playback will
be impossible.
•The maximum allowable number of folders is
512 (including root directory and folders with
no MP3IWMAlAAC file).
•The maximum allowable number of files
in
a
folder is 255.
•
You
can store the MP3 files, WMA files, and
AAC files together
in
a folder.
40
NX409/NZ409
To Next Page
Loading...
Need help?
General
