English
20
XMD3
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and
consult your store of purchase.
CD
CD changer
MeasureError Display Cause
A CD is caught inside the CD deck and is not ejected.
A CD cannot be played due to scratches, etc.
A CD is loaded upside-down inside the CD deck and
does not play.
A CD inside the CD changer is not loaded.
A CD inside the CD changer cannot be played due to
scratches, etc.
A CD inside the CD changer cannot be played because it
is loaded upside-down.
This is a failure of CD deck’s mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped-disc.
Eject the disc then reload it properly.
This is a failure of CD changer’s mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
To Next Page
Loading...
Need help?
General
