2
INTRODUCTION
Thank you for purchasing this CLARKE Submersible Water Pump.
This pump is designed for pumping clean water or water containing solids in
suspension. It is not designed for pumping slurry, sludge, mud or heavily
polluted water, or any water containing chemicals or other acidic
contaminants including salt water.
These pumps have the ability to pump solids as large as 30mm, however, the
outlet elbow and delivery pipe diameter will restrict this.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
SPECIFICATIONS
SPECIFICATIONS CSV1A CSV2A
Outlet Diameter 1½”/38mm 1½”/38mm
Motor Output (Watts) 330 620
Head Max (m) 5 8
Max. Capacity (L/min) 118 200
Weight 3.7 5.2
Cable (m x mm
2
)
10 x 1.5 10 x 1.5
Dimensions (mm) not including the elbow 140 x 300 140 x 300
To Next Page
Loading...
Need help?
General
