To Next Page

To Previous Page

6. Then place the dust container into the device and close the dust container cover. The

cover must be heard to engage in place.

Cleaning the HEPA Exhaust Air Filter

1. Pull the fastener of the exhaust air hatch (C) upwards and

detach the hatch from the device.

2. Remove the ﬁ lter from the exhaust air hatch.

3. Tap the ﬁ lter out over a dustbin. Clean the ﬁ lter using a soft

brush if necessary. You can also rinse the ﬁ lter under clear,

lukewarm water. Attention: Do NOT use any detergent! Allow

the ﬁ lter to dry completely.

4. Insert the ﬁ lter back into the exhaust air hatch.

5. Then place the exhaust air hatch into the device and close the

hatch. The hatch must be heard to engage in place.

Cleaning the Housing

If necessary, clean the housing using a slightly damp, soft cloth.

Cleaning the Nozzles

Remove hair and ﬂ uff from the nozzles at regular intervals.

Storage

Store the vacuum cleaner in a dry, cool place indoors that is not accessible to children

and animals.

Tips for practical storage:

– Push together the telescopic tube as far as possible and, if

you have not already done so, place the ﬂ oor nozzle onto the

telescopic tube. You can now hook the ﬂ oor nozzle onto the

back of the device.

– You can attach the crevice and brush nozzle as well as the

upholstery nozzle to the telescopic tube using the bracket that

is also supplied.

Cleanmaxx CP-CY4207EP-7 User Manual

Questions and Answers: