24
To remove the cleaning head, depress the catch and pull the
cleaning head out at the same time.
• If you would like to use one of the other enclosed nozzles, it must fi rst be attached to
the nozzle adapter (F):
• An arrow is embossed on the end piece of the nozzle and
the nozzle adapter. Connect the two parts so that the arrows
are pointing towards one another and then turn the nozzle
to the stop.
• To remove the nozzle, turn it back until the arrows on the
nozzle and adapter are pointing towards one another and
pull it out.
• The nozzle adapter will be attached to the main unit in the exact same manner as the
cleaning head: Insert it in the steam nozzle until the catch audibly locks into place.
• To remove the nozzle adapter, depress the catch and pull the adapter out at the same
time.
Attaching the fl oor pad and carpet cleaning head
• The fl oor pad (K) is attached to the cleaning head with Velcro straps.
Place it on the cleaning head and push it fi rmly. After use, simply
pull it off of the cleaning head.
• To clean carpets, place the carpet cleaning head (M) fl at on the
fl oor and place the cleaning head with the fl oor pad in the carpet
cleaning head.
To Next Page
Loading...
Need help?
General
