Reset all channels with factory default privacy codes
1. Press and hold the FUNC/CODE button and turn the
Power ON/OFF Knob to turn on the radio
simultaneously.
2. 4 consecutive beeps following with a message “Code
Memory OFF” prompted, all the channels on the radio
has been reset to factory default privacy codes
successfully. Current channel would become channel
1 as default also.
See Channel and Default Privacy Code Table on page 10.
Voice Activated Transmit (VOX)
In VOX mode, your microTALK
®
radio can be used “hands-free,” automatically
transmitting when you speak. You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions triggered by background noise.
To turn VOX mode on or off:
1. During Standby mode, briefly press and release FUNC
button, the current VOX status is prompted.
2. Press the Up or Down button to turn VOX On or Off.
3. Choose one of the following.
a. Press the FUNC button to enter the new setting and
proceed to other functions.
b. Press the Talk button to enter the new setting and
return to Standby mode.
c. Do not press any buttons for 6 seconds to enter the
new setting and return to Standby mode.
4. Once the VOX is turned on, Blue LED flashes every 5
seconds.
Scrolling Through the FUNC Features.
By scrolling through the FUNC features, you will be able to select or turn on
preferred features of your microTALK
®
radio. When scrolling through the FUNC
function, your radio features will be prompted in the same predetermined
order:
Set Vox On/Off
Set Vox Sensitivity
Set Roger Beep On/Off
Operation
More Functions
12 13
FUNC/CODE Button
FUNC/CODE Button
FUNC and
Up/Down Buttons
Blue VOX Indicator
Flashes
ON/OFF Knob
To Next Page
Loading...
Need help?
General
