Cobra Microtalk Series User Manual

Operation
7
Note
While PTT button is
depressed you cannot
receive incoming calls.
Note
Your incoming “Call”signal
level is dependent on your
unit volume s e t t i n g.
Talking To
Another Party
Operation
6
Note
Units must be on same
channel to communicate.
Choose Channel A or B.
Note
You can also communicate
with other 2-way PMR
radios (some have as many
as eight channels).
Channel A =Channel 3 on
other units
Frequency is 446.03125 MHz
Channel B = Channel 5 on
other units
Frequency is 446.05625 MHz
Calling Another Party
To alert another party that you wish to
communicate:
Turn on your MicroTalk 2-way radio.
An audible “tone”will indicate the unit is on
and the TX/RX indicator on the front of the
unit will illuminate green.
Place antenna in full
upright position.
Select Channel A or
Channel B by mov i n g
the CHANNEL butto n
up or down.
Push and release CALL button.The unit you are
calling will hear a two second ring/tone.
Talking To Another Party
To send your outgoing message:
Calling
Another
Party
Hold mic about
2 inches from
mouth. Speak in
a normal voice.
Release PTT
button and listen
for response.
Push and hold
PTT button.
The TX / RX indicato r
will illuminate red.
1 2
3 4
1
2 3
4
PMR100-UK.qx copy 6/17/99 9:36 AM Page 6

Cobra Microtalk Series Specifications

General

Brand	Cobra
Model	Microtalk Series
Category	Two-Way Radio
Language	English