Cobra Microtalk Series User Manual

Select channel by moving the channel button
up or down. Select either Channel A or B for
optimum clarity.
Select Channel
Turn on the MicroTalk 2-Way Radio.
Turning On Your MicroTalk
Rotate ON - OFF Volume Control clockwise.
An audible “tone”will indicate the unit is on and
the TX/RX indicator on the front of the unit
will illuminate green.
Operation
5
Note
Units must be on same
channel to communicate.
Choose Channel A or B.
Note
You can also communicate
with other 2-way radios
(some have as many as
eight channels).
Channel A =Channel 3 on
other units
Fre q u e n cy is 446.03125 MHz
Channel B =Channel 5 on
other units
Fre q u e n cy is 446.05625 MHz
Note
The Auto Battery Save
Circuit does not effect the
unit’s ability to receive
incoming transmissions.
Select
Channel
Operation
4
Note
To learn more about the
range of your MicroTalk,
see page 9.
Range is dependent on
battery condition and
geographic territory.
Note
Whenever the unit is on you
can re ce i v e co m m u n i ca t i o n s .
Turning
On Your
MicroTalk
Auto Squelch
Maximum
Range
Extender
2
1
Auto Squelch
Your MicroTalk is equipped with Auto Squelch,
which automatically shuts off weak transmissions
and unwanted noise due to terrain conditions or
if you have reached your range limit.
Maximum Range Extender
Auto squelch can be temporarily removed
to allow all signals to enter by pressing the
M button (Maximum Range Extender).
1
Auto Battery Save
Your MicroTalk has a unique circuit designed to
extend battery life. If there are no transmissions
within 10 seconds, the unit will automatically
switch to battery save mode.
Auto Battery
Save
Push and hold
the M/RANGE
EXTENDER button
to allow all signals
to ente r.
PMR100-UK.qx copy 6/17/99 9:36 AM Page 4

Cobra Microtalk Series Specifications

General

Brand	Cobra
Model	Microtalk Series
Category	Two-Way Radio
Language	English