To Next Page

To Previous Page

Push and release button again.

MAIN CHANNEL will flash and only the

icon will remain flashing.

Select desired main channel you wish to store

(1-14) by pushing and releasing

buttons.(Use CHANNEL 12 for this example.)

Advanced Features

Note

Once you enter memory

mode you can talk and lis-

ten to any channel you

select after programming is

complete. See Using

Memory Locations section

on page 28.

continued

Push and release button until icon and

a memory location flashes.

Select memory location you wish to change by

pushing and releasing buttons (Use

MEM 6 for this example).

Advanced Features

Programming Memory Locations

Your MicroTalk has 10 memory (0-9) locations for

storing your most frequently used channels.

Rotate ON - OFF Volume Control clockwise.

An audible “tone”will indicate the unit is on

and then the LCD will go through a 3 second

self-test and then go to operational mode.

Programming

Memory

Locations

310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 24

Cobra MicroTalk How To Use

Other manuals for Cobra MicroTalk