ComAp InteliLite NT MRS19 User Manual

Programming your Replacement IL-NT
Controller
*These instructions are to be used when you are replacing a controller and want to
“pull” program from old controller and load it into the new one. These can also be
used if you want to make a “copy” of another controller.
Step 1: Connect to old controller and save the archive in an easy to find location.
Step 2: Right-click on that saved archive> make a copy and paste it in same location. (As seen below)

ComAp InteliLite NT MRS19 Specifications

General

Brand	ComAp
Model	InteliLite NT MRS19
Category	Controller
Language	English