ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K01070
10
8.2.Grindadjustmentsystem
8.2.1.Micrometricalsystem
Rotate the grind regulator ( ) until reaching the grind level desired.
Rotating the grind regulator clockwise will result in a courser grind; turning the
regulatorcounterclockwisewillresultinanergrinder*(Fig. 3).
*Itisrecommendedthatthemotorberunningwhenadjustingtonergrindsetting.
This helps to avoid jamming the burrs, which can occur when coffee beans are in the
grindchamber,andthegrindregulatorisadjustedtowardsne.
8.2.2.SteppedGrindadjustment(optional)
In the stepped adjustment versions, the positions on the grind regulator are limited
by“steps”thataredenedbytheholeandpinpoints(Fig. 4).
The instructions detailed in section 8.2.1. on adjusting the regulator should be
followed, while at the same time, pulling the brake post ( ) (Fig. 4) up to release the
locking action of the post.