13
13
Cleaning and MaintenanceFrequently Asked Questions
Q. How do you change the optional Wall Touch Control to Fahrenheit/Celsius?
A. Long press on the up and down arrows on the re unit to toggle between Fahrenheit
and Celsius.
Q. What distance can the remote be used from the replace?
A. Optimal distance for the remote control is within 6 meters.
Q. Can you turn on the replace via the manual control and off via the remote (or vise
versa)?
A. Yes.
Q. Does the replace need to be on a dedicated 20 amp circuit?
A. Yes.
Q. What thickness of sheetrock should be used for the recessed installation?
A. 12mm or 16mm, thinner is recommended for tile façade.
Q. How often do the batteries in the remote need to be replaced?
A. Annually, possibly more with heavy use.
Q. Is there a remote receiver in the replace that requires batteries?
A. No, only the actual remote requires batteries. The rest of the replace runs entirely off
of the main power supply.
There is very little maintenance involved with your electric replace. Please follow the
few points below:
• On a semi-annual basis unplug the machine from it’s power source, wait for the
heating element to cool and dust the re unit with a dry cloth. Be careful not to brush
any wires that may be exposed as you do this.
• To clean the glass face of the replace simply use your desired glass cleaner with
paper towels.
• To clean the air inlets/outlets, wipe with a soft cloth or the nozzle of a vacuum
cleaner
• Dust can easily build up around the heater area inside the re unit, on the left and
right sides. Take particular care to clean this area on a regular basis to prevent
buildup.
• For long periods of inactivity, please unplug the replace and ensure the
surrounding area remains dry.
To Next Page
Loading...
Need help?
General