Massage Function
After powering on, if you press
the “ON/OFF” button, the buzzer
will ring with a short and crisp
sound. The LCD screen will
display the main menu interface
and enter a standby mode. Then,
the remote control will display
the MENU page which has the
selections of “Auto”, “Manual”,
“Airbag”, “Roller”, “Heating”,
“Timer”, “Settings”, and “Stop”.
ON/OFF INTERFACE
After pressing the “Menu” button, it will switch to the menu interface
and all the massage selections can be chosen by pressing the buttons.
Pressing the “Menu” button will exit the menu interface and return to
ON/OFF interface.
Auto Massage: After pressing the “ON/OFF” button, the cursor will stop at
the Automatic massage program by default. Press “OK” button to enter the
menu interface, and the screen of remote control will display the following
massage programs: “Recover”, “Relief”, “Stretch”, “Renew”, “Calming”
and “Special”. Under “Special” massage program, there are two automatic
massage program available which are “Refresh” and “Energy”.
Massage Function
Massage Function
Massage Function
MENU INTERFACE
MANUAL MASSAGE
On the “Menu” interface, select manual massage
through the navigation button. Press “OK” button and
four functional options will be presented which include
“Mode”, “Position”, “Width” and “Speed”. If you select
“Mode” option, press “OK” to enter the next option,
and select the desired massage technique - kneading,
tapping, knocking, kneading & tapping and shiatsu. If
you select “Position” option, press “OK” to enter the
next option, and select the desired body part - whole,
partial and point. If you select “Width” option, press
“OK” to enter the next option, and select the desired
width for massage rollers - narrow, middle, and wide. If
you select “Speed” option, press “OK” to enter the next
option, and select the desired speed for massage rollers -
Level 1, Level 2, Level 3, Level 4, and Level 5.
MASSAGE OPERATION
LCD DISPLAY GRAPHIC DESCRIPTIONS
Massage Function
Massage Function
18
To Next Page
Loading...
General