❶
❹
❷
Power Switch
❸
a
❷
❸
ON/OFF
STEP 1
Power On.
❶ Plug in the power cable into the power socket which indicated as “a” in the diagram.
❷ Plug in the power plug into the power supply socket.
❸ Press the “ON/OFF” button at the power cord socket to turn on the massage chair.
❹ Press “ON/OFF” button on the remote control. It will beep once and enters the main menu interface.
STEP3
Power O.
❶ Press “ON/OFF” button to turn o the massage chair and
it will restore to its upright position automatically.
❷ After the massage rollers return to its default position,
turn o the power switch at the power case.
❸ Unplug the power plug from the socket.
WARNING
1. Before using, pull up the head cushion,
back cushion, etc. to check if the PU
material is damaged. If is damaged,
please stop using the massage chair
and contact Careline or Coway Logistic
Technicians to repair or replace.
2. Only plug to proper socket.
ATTENTION
1. Before sitting down, please make sure
there is no objects in between armrest, leg
rest, backrest and seat of massage chair.
2. Make sure the massage chair is in upright
position before using.
3. Do not stand on massage chair while
in use.
OPERATION INSTRUCTION AND FUNCTION ILLUSTRATION
Remote
Control
STEP 2
Massage.
❶ The massage chair will operate based on the massage selections. Regarding
the massage methods, please refer to page 16 and 17 for more details.
❷ After the massage operation ends, the massage chair will return to the
default position and the display screen will turn o.
22
To Next Page
Loading...
General