recommended accessories
RECOMMENDED ACCESSORIES
ITEM CAT. NO.
Work Bench ......................... (See Catalog)
Motor Pulley (Four Step) 1/2" Bore ........... 9-27921
Motor Pulley (Four Step) 5/8" Bore ........... 9-27922
Drill Chuck 1/2" Capacity with
No. 1 M.T. Shank ....................... 9-22342
Screw Center with No. 1 M.T. Shank .......... 9-21164
Ball Bearing Center with
No. 1 M.T. Shank ....................... 9-21122
60 ° Center with No. 1 M.T. Shank ............ 9-21102
Face Plate, 4" Dia. with 3/4"-16 Thread
9 holes .................................. 9-2489
Face Plate, Including Spurs and Screw Center
3" Dia. with 3/4'°-16 Thread ............... 9-20912
Sanding Table ............................ 9-24922
9" Dia. Sanding Disc Only with 3/4"-16
Thread ................................ 9-24906
Turning Toots .................... (SEE CATALOG)
Draw Bolt with !/4"-20 Threads ............. 9-21542
Power Tool Know How Handbook
Radial Saw ............................... 9-2917
Table Saw ................................ 9-2918
Bowl Turning Tool rest ..................... 9-24903
Face Plate 6"" with 3/4"-16 Thread
6 holes ................................ 9-24904
Copy Cr_fter ............................. 9-24907
Speed Reducer ............................ 9-23895
Face Plate 4" dia, with 3/4"ot6 Thread
Cast iron, 6 holes ........................ 9-23865
Diameter Sizing Gauge ..................... 9-24909
The above recommended accessories are current and were
available at the time this manual was printed.
21
To Next Page
Loading...
Need help?
General
