additional safety instructions for wood turning lathes
WARNING:
(GAINED FROM FREQUENT USE OF YOUR
MACHINE) TO BECOME COMMONPLACE.
ALWAYS REMEMBER THAT A CARELESS
FRACTION OF A SECOND IS SUFFICIENT TO
INFLICT SEVERE INJURY,
DO NOT ALLOW FAMILIARITY WARNING_ THE FOUR STEP LATHE AND
MOTOR PULLEYS FURNISHED ARE DE-
SIGNED TO RUN THE LATHE AT THE COR-
RECT SPEEDS WHEN USED WITH A 1725
R.P.M. MOTOR. DO NOT USE A 3450 R.P.M.
MOTOR TO INCREASE THE SPEED BECAUSE
IT COULD BE DANGEROUS.
WEAR YOUR
The operation of anv power tool can result in foreign
objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety goggles complying
with ANSI Z87.1 (shown on Package) before commencing
power tool operation. Safety Goggles are available at Sears
retail or catalog stores.
4
To Next Page
Loading...
Need help?
General
