PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while tired or under the
influence of drugs, alcohol, or medication. A moment of hlattention while
olerating lower rooksmay resuDtin serious iersonal hljury.
• Use personal protective equipment. Always wear eye protection. Safety
ecuilment, such as dust mask, non-skid safety shoes, hard hat, and hearing
irotection, when used for al irotriate conditions, witl reduce mersonaliniuries.
• Prevent unintentional starting. Ensure that the switch is in the OFF-
position before connecting to a power source and/or battery, picking up
or carrying the tool. Carrying power tools with your finger on the switch or
energizing =ower tools that have the switch on invites accidents
• Remove any adjusting key or wrench before turning the power tool on. A
wrench or key left attached to a rotating =art of the =ower tool may result in
=ersonal iqiury,
• Do not overreach. Keep proper footing and balance at all times. This
enables better control of the tower tool in unex=ected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes,jewelry, or
long hair can be caught in moving =arts.
If devices are provided for the connection of dust extraction and
collection facilities, make sure that these are connected and properly
used. Use of these devices carl reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
application. The correct =ower tool will do the job better and more safely at
the rate for which it was designated.
Do not use the power tool if the switch does not turn it ON and OFF. Any
=ower tool that cannot be controlled with the switch is dangerous and must
be re=aired.
• Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such treventive safety rneasures
reduce the risk of starting the tower tool accidentally.
• Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous inthe hands of untrained users
• Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by =oorly maintained =ower tools.
Page 6
Keep cutting tools sharp and clean, Pro=edy maintained cutting tools with
shar= cutting edges are less likely to bind and are easier to contro!_
Use the power tool, accessories, blades, etc. in accordance with these
instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work
to be performed. Use of the =ower tool for o=erations different from those
intended could result in a hazardous situation,
BATTERY TOOL USE AND CARE
Make sure that the switch is in the OFF =osition before inserting the battery
=ack. Inserting the battery =ack into =ower tools that have the switch QN
invites accidents,
° Recharge only with the charger specified in this manual. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery lack,
* Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
When the battery pack is not in use, keep it away from other metal
objects, such as paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause bums or a fire.
Under abusive conditions, liquid may be ejected from the battery;
void contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Licuid ejected from the
battery may cause irritation or-burns.
SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This wifl ensure that the safety of the =ower
tool is maintained.
• Follow instructions in the Maintenance section of this manual. Use of
unauthorized ia_s or failure to follow Maintenance instructions may create a
risk of shock or injury.
SPECIFIC SAFETY RULES FOR CORDLESS MULTI-TOOL
* Never use your Multi-Tool to =erform sanding or se=arating o=erations in
wet conditions.
o Always wear eye =rotectiorl.
o Always wear ear =rotection during extended ieriods of o=eration,
o Always wear a dust mask if the o=eration is dusty,
* Wear irotective gloves when changing a1 ilication accessories. A=|lication
accessories become hot after mrolon,qedusage.
Page 730566 ManuaLRev sed :!1 0715 30566 ManuaLRev sed_11 0715
To Next Page
Loading...
Need help?
General
