Crestron CCS-UC-1 User Manual

8
•
CCS-UC-1: Secure SIP Endpoint with Cisco UCM 11.0 Configuration Guide – DOC. 7991A
• RootCA certificate (root_cer). This is the certificate that is downloaded from the
certificate authority that serves the Cisco UCM (the DNS IP configured on the
CUCM and Crestron Mercury device). This certificate is required by the Crestron
Mercury device to allow it to validate the Cisco UCM when Enable Server Validation
is enabled in the
SIP Calling
configuration screen.
• SIP certificate (sip-cert.pfx). This is a specific device certificate that is downloaded
from the same certificate authority that serves the Cisco UCM. This certificate
contains information on the CA that the Cisco UCM identifies/recognizes and
enables a successful TLS handshake. This certificate is a signed certificate from the
CA with the signing request generated on the same CA using a specific device
certificate request with server and client authentication.
Add Root Certificate
To upload certificates to the device, follow this procedure:
1. On the web GUI, navigate to
Device
>
SIP Calling
.
2. Click
Manage Certificates
.
Crestron Mercury Configuration: Manage Certificates: Add Root Certificate
3. Click
Add Root Certificate
.

Crestron CCS-UC-1 Specifications

General

Brand	Crestron
Model	CCS-UC-1
Category	Conference System
Language	English