Page 42
Contractor Series Power Amplifiers
Reference Manual
10.2 House of Worship
CH1, CL2 and CL4 amplifiers are used in the house of
worship example, shown in Figure10.2.
The CH1 is used in Stereo mode, with each channel set
to 70V operation to drive two separate dristributed
speaker home-runs. Relatively long speaker lines with-
out significant line-loss are possible due to the high-
voltage, low-current characteristics of the 70V
distributed method.
The CL2 is used in Stereo mode. One channel will drive
multiple delay speakers in a balcony. The other channel
will drive multiple stage monitors. The low impedance
capability of the CL Series allow multiple speakers to
be paralled on each channel.
The CL4 is chosen because of its high-power capabil-
ity, and is used in Stereo mode to provide channel-inde-
pendent gain structure for a bi-amped full-range
speaker cluster.
Figure 10.2 House of Worship System Example
To Next Page
Loading...
Need help?
General
