EasyManuals Logo
Home>Cub Cadet>Tractor>7530

Cub Cadet 7530 User Manual

Cub Cadet 7530
126 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
STORAGE
118
REMOVING FROM STORAGE
Be sure that the grade of oil in the engine crankcase is as specified in
Engine Oil Selection in this manual.
A. Loosen the fuel tank drain plug and fuel filter cup, and be sure all water
and sediment has drained from the fuel system before closing.
Tighten the drain plug and replace the filter cup.
B. Check the level of the coolant in the radiator.
C. Check engine oil level.
D. Check hydraulic fluid level.
E. See that the battery is fully charged and that the terminal connections
are clamped tightly.
F. On hydrostatic drive tractors, follow the same procedure for starting as
Starting Procedure for Hydrostatic Drive Tractors after Transporting on
truck or flatcar in this manual.
G. Start the engine and let it run slowly.
IMPORTANT: Keep the doors wide open and move the machine outside of
the storage room immediately to avoid danger from exhaust fumes. Do not
accelerate the engine rapidly or operate it at high speed immediately after
starting.
NOTE: CUB CADET CORPORATION reserves the right to make
improvements in design or changes in specifications at any time without
incurring any obligation to install them on units previously sold.

Other manuals for Cub Cadet 7530

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet 7530 and is the answer not in the manual?

Cub Cadet 7530 Specifications

General IconGeneral
BrandCub Cadet
Model7530
CategoryTractor
LanguageEnglish

Related product manuals