EasyManua.ls Logo

Cub Cadet Zero Turn ZTS2 50 User Manual

Cub Cadet Zero Turn ZTS2 50
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background image
13
OPERATION
3
Forward Drive Pedal
The forward drive pedal is located on the right
side of the tractor, along the running board.
Press the forward drive pedal forward to cause
the tractor to travel forward. Ground speed is
also controlled with the forward drive pedal.
The further forward the pedal is pressed, the
faster the tractor will travel. The pedal will
return to its original/neutral position when it
is released.
4
Reverse Pedal
The reverse drive pedal is located on the right
side of the tractor along the running board.
Ground speed is also controlled with the
reverse drive pedal. The further downward
the pedal is pressed, the faster the tractor will
travel. The pedal will return to its original/
neutral position when it is released.
NOTE: This Operator’s Manual covers several models. Tractor
features may vary by model. Not all features in this manual are
applicable to all tractor models and the tractor depicted may
differ from yours.
NOTE: All references in this manual to the left or right side and
front or back of the tractor are from the operating position only.
Exceptions, if any, will be specified.
1
Steering Wheel
The steering wheel is used to control the direction of the tractor.
2
Steering Column Adjustment Lever
The steering column adjustment lever is located on
the left side of the steering column. To adjust the
column pull up on the steering column adjustment
lever and move the steering column up into the
desired position. Release the steering column
adjustment lever to secure the steering column in
the desired position.
1
10
5
11
7
6
8
12
13
14
15
16
17
3
4
20
18
19
2
9
Figure 15
16a
16b

Questions and Answers:

Cub Cadet Zero Turn ZTS2 50 Specifications

General IconGeneral
BrandCub Cadet
ModelZero Turn ZTS2 50
CategoryLawn Mower
LanguageEnglish

Summary

Safe Operation Practices

GENERAL INFORMATION & PREPARATION

Essential guidelines, information, and critical checks before operating the tractor.

OPERATING PROCEDURES

Key steps and precautions for operating the tractor safely.

CHILD AND SLOPE SAFETY

Specific safety advice concerning children and operating on slopes.

Assembly

BATTERY AND ELECTRICAL CONNECTION

Guide to connecting battery cables and understanding battery information.

Operation

STEERING AND DRIVE CONTROLS

Explains steering wheel, column, and forward/reverse drive pedals.

PRE-OPERATION CHECKS AND STARTING

Procedures for pre-operation checks, safety interlocks, and starting the engine.

Troubleshooting

ENGINE STARTING AND RUNNING PROBLEMS

Solutions for issues like engine failure to start, erratic running, or overheating.

Related product manuals