5
CONTROL PANEL
1. Clock Display
Displays time of day and auto on and off
times.
2. Function Knob
For setting time of day, and auto on and
auto off times.
a. Auto On
The Auto On feature is used to
program the start time of the brew
cycle. The auto on time can be set
for any time, day or night. “PM” is
displayed on the LCD for nighttime
program times.
b. Auto Off
The Auto Off feature is used to shut
off the coffeemaker at a preset time,
anywhere from 0 to 4 hours.
c. Program Set
The Program Set function is used to
set the time for the Auto On function.
d. Brew
The Brew function is used to start the
brew cycle directly.
e. Clock Set
Used to program the time of day.
f. Audible Tone (not shown)
The Brew Central
®
Coffeemaker is
equipped with an audible tone which
will sound 5 times when the coffee
has completed brewing (coffee will
continue to stream from the lter for a
few seconds after tone).
3. Flip Switch
Retro-style ip switch is used to turn
your coffeemaker on and off and works
in tandem with the function knob.
4. Heater Plate Control Knob
For controlling the temperature of the
coffee after brewing. It has high, medium
and low settings.
5. Hour and Minute Buttons
For use in setting hour and minute for time
of day, auto on time, and auto off time.
6. On and Auto On Indicator Lights
7. Self Clean Setting
Used for removing calcium buildup.
8. 1-4 Cup Setting
For brewing smaller pots of coffee –
it provides double heating of the water,
so coffee is piping hot.
1
2a
2e
2d
5
7
4
3
2b
2c
6
8
To Next Page
Loading...
Need help?
General
