Culver Mobility ARTEMIS User Manual

01
1. Intended use
For people with disabilities or who can not walk properly (excluding obesity).
2. Type, specification and structure
®. The product model and de scription are shown i n the table below.
Model
Maximum user qua 1i t y
Driving form
Drive wheel d i ameter
ARTEMIS
120kg
rear-whee 1 drive
406mm (1600 hours)
120kg
f ront-whee 1 drive
406mm (1600 hours)
120kg
rear-whee 1 drive
559mm (2200 hours)
®. The structure of the wheelchair i s shown i n figure 1.
2 Seat belts 3 Handrails 4 Seat cushion
5 Batteries
9 Chair rack
1 3 Control 1 er
6 Folding rack
10 Guard plate
14 Pedal frame
7 Motor
11 Brake
15 Front wheel
8 Anti Rollover
12 Rear wheel
16 Foot pedal
Backrest
Fig. 1 schematic diagram of electric wheelchair structure 3. Main performance
indicators
Maximum speed: W6kmh・
. Static stability: 39 ° .
② .Running braking performance.
a) Horizontal Road Braking: Wl・ 5 M.
b) Maximum safe slope braking : W3. 6m (6° )
(4)
(5)
(6)
. Dynamic stability: 36 ° .
. Obstacle Height :》40 mm
.
(3)
. Slope Holding Capacity: 9 ° .
©. Trench width: 100 mm.

Culver Mobility ARTEMIS Specifications

General

Brand	Culver Mobility
Model	ARTEMIS
Category	Mobility Aid
Language	English